Arrival Times - TomTom RIDER User Manual

Tap YES to enter an arrival time. RIDER shows you whether you will arrive
on time. For more information, see Arrival times on page 19.
The route is then calculated by your TomTom RIDER.
9. When the route has been calculated, tap Done.
TomTom RIDER will immediately start guiding you to your destination with
spoken instructions and visual instructions on the screen.
You should plan your route before you start driving. It is not possible to plan
the route in this much detail once you start moving. While you are driving,
only the driving menu is displayed. For more information, see this chapter:
Menus on page 25.
Note: Before you can plan a route in this way, TomTom RIDER must first
locate your current position.

Arrival times

When you plan a route, your RIDER asks you if you need to arrive by a
particular time:
Tap YES to enter an arrival time.
Your RIDER calculates your arrrival time and shows you whether you will
arrive on time. Your arrival time is constantly recalculated during your journey.
The status bar shows whether you will arrive on time or late, as shown below:
You will arrive 55 minutes before the arrival time you entered.
If the estimated arrival time is more than five minutes before the
time you entered, it is shown in green.
You will arrive 3 minutes before the arrival time you entered.
If the estimated arrival time is less than 5 minutes before the
time you entered, it is shown in yellow.
•
•
•
19
•
•
•