Axis Q60 Series User Manual page 13

AXIS Q60 Series
Setup
4. In the list of actions, under Recordings, select Record video.
5. Select the stream profile where audio has been turned on.
6. Set the prebuffer time to 5 seconds.
7. Set the postbuffer time to 60 seconds.
8. In the list of storage options, select SD card.
9. Click Save.
Zoom in on a specific area automatically with gatekeeper
This example explains how to use the gatekeeper functionality to make the camera zoom in automatically on the license plate of a
car that passes through a gate. When the car has passed, the camera zooms out to the home position.
Create the preset positions:
1. Go to Settings > PTZ > Preset positions.
2. Create the home position that includes the entrance of the gate.
3. Create the zoomed-in preset position so that it covers the area in the image where you assume that the license plate
will appear.
Create a motion detection profile:
1. Go to Settings > Apps and open AXIS Video Motion Detection.
2. Create a profile that covers the entrance of the gate and then save the profile.
Create a rule:
1. Go to Settings > System > Events and add a rule.
2. Name the rule "Gatekeeper".
3. In the list of conditions, under Application, select the motion detection profile.
4. In the list of actions, under Preset positions, selectGo to preset position.
5. Select a Video channel.
6. Select the Preset position.
7. To make the camera wait a while before it returns to the home position, select Home timeout, and set a time.
8. Click Save.
Use audio to deter intruders
This example explains how to connect a speaker to the camera and set it up to play a warning message when the camera detects
motion in a restricted area.
Required hardware
• Active speaker with built-in amplifier and connecting wires
NOTICE NO NO TICE TICE
Make sure the camera is disconnected from power before making the connections. Reconnect to power after connecting the
wires.
Add audio clip to the camera
13