Table of Contents
Advertisement
Available languages
Available languages
Check motor safety filter occasionallyand
change when dirty.
Electrical
Shock Hazard
Unplug power cord from electrical
outlet.
Do not operate the cleaner
without the motor safety filter. Be
sure the filter is dry and properly
installed to prevent motor failure
and/or electrical
shock.
Remove the bag as outlined in the BAG
CHANGING
section.
MOTOR SAFETY FILTER
ELECTROSTATIC
This white filter must be replaced when
dirty. It should be replaced regularly
depending on use conditions. The filter
CANNOT be washed as it will lose its
dust trapping
ability.
NOTE: See PARTS AND FEATURES
for
motor safety filter number.
1. Lift the rubber
retainer and pull
out motor safety
filter as shown.
Rubber
Retail'mr
/1#//
2. Replace the
filter, white side
out, facing the
dust bag, by slid-
ing it back into
place under the
ribs in the bag
cavity. Tuck filter ""="
in so that it fits
completely under
the rubber retainer.
3. Replace the bag as outlined in the BAG
CHANGING
section.
t5
Advertisement
Table of Contents
