Program Edit; Picture Menu - SONIQ S43V15A Manual

OSD Menu Operation
ATV Manual Tuning
MENU
Button
Press Up and Down Button to highlight ATV Manual Tuning, then press OK to enter
sub-menu.
1. Analog Scan : Press "OK" and then adjust Analog Scan by pressing Left and Right
Button.
2. Sound System : Press Left and Right Button to change (left/right/up/down) it into BG,
DK or I mode.
3. Search : Press Left and Right Button to set the Frequency and stop it by pressing OK,
Left and Right Button.
4. Frequency : Display the adjusted frequency channel.
5. Fine Tune : Press Left or Right Button to make minor modulation and stop it by
pressing OK, Left and Right Button.

Program Edit

Press Up and Down to select Channel Edit, then press OK Button to enter sub-menu.
1. Press Green Button to rename the current channel. (only available in ATV)
2. Press Yellow Button to change the program order.
Selected channel can be moved by using Up and Down, then press OK for confirm.
3. Press Blue Button to skip the selected channel.
4. Press Red Button to delete the selected channel.
Red Button
Yellow Button
Green Button
Blue Button
EPG
Press Up and Down to select EPG, or press EPG Button on the remote control. Channel
list, program information and progress list can be carried out. The picture shows as below.
25
Program Edit
901 C-00
ATV
Delete Rename Move Skip
Select Confirm Return Exit
OK
OSD Menu Operation

Picture Menu

Press MENU Button to bring up the main menu, then press Left and Right to select the
PICTURE MENU.
1. Picture Mode:
Press Left and Right to adjust the mode colour by Standard. Dynamic, User, Mild.
Contrast, Brightness, Sharpness, Saturation can be adjusted only under User mode,
press MENU to return to the main menu.
2. Noise Reduction:
Press OK Button to adjust among Strong, Weak, Middle and Off.
3. Color Temp:
Press Left and Right Button to select Cool, Standard, Warm and User. You can adjust
R Gain, G Gain, and B Gain in User mode.
4. Energy Saving:
Press Left and Right Button to select Standard or High.
5. Aspect Mode:
Press Up and Down to choose Aspect Mode, press OK to confirm. Press Left and
Right to select Full, 4:3 or Auto.
6. PC Settings (available under VGA or HDMI)
Press Up and Down to select PC Settings, press OK to enter the sub-menu, you can
also choose auto adjust to adjust the picture to full screen, or you can select clock,
phase, horizontal position, vertical position for adjusting.
7. Screen Mode (available under VGA or HDMI)
Press Up and Down to choose Screen Mode, press OK to confirm. Press Left and
Right to select PC/Video.
8. Color Space (available under PC):
Press Left and Right Button to select RGB Limited or RGB Full.
OK Button
Navigation Button
MENU
Button
26
1
2
10
11
12
21
22
23
24
Confirm
Picture Mode Standard
Noise Reduction Middle
Color Temp User
Energy Saving Standard
Aspect Mode Full