Table of Contents
Advertisement
Note: Click Restore Default Folder to revert to the default installation path.
6. Click Next.
The Choose Link Folder screen displays:
Figure 39. Choose Link folder
7. Select the location where the program links will be created:
v In your Home folder – Creates the links in the directory where the user's
files are typically stored. For example: /home/bill.
v Other – Creates the links in the default location (/opt/IBM/PTManager).
To specify a different location, click Choose and select a directory on the
workstation's hard drive.
v Don't create links – No links will be created.
8. Click Next.
The Pre-Installation Summary screen displays.
9. Click Install.
The Installing ProtecTIER Manager screen displays and ProtecTIER Manager
is installed.
When the installation finishes, the Install Complete screen displays.
10. Click Done.
The ProtecTIER Manager Wizard closes.
11. When the command prompt returns to the Terminal window, type: Exit
<enter> to close the window:
12. Go to Chapter 11, "Using ProtecTIER Manager," on page 119.
Chapter 10. Installing ProtecTIER Manager
117
Advertisement
Table of Contents
