Settings; Using The Settings - Toshiba 50U7950 Series Owner's Manual

Using the Settings

Press the [ ] button on your remote to enter the Home screen,
and use the D-pad to select the
Network
Wi-Fi
Turn on the Wi-Fi to access the Internet via a wireless network
connection.
Select an available network, press [OK] to confirm. A screen
will appear to prompt you to enter the password if necessary.
Connect via WPS
If your access point (AP) supports Wi-Fi Protected Setup (WPS),
you can connect to the network via press the Wi-Fi Protected
Setup button on your router. WPS will automatically configure
the SSID and WPA key.
Add new network
You can add wireless network.
Scanning always available
Check to scan for networks even when Wi-Fi is turned off.
Anyview Stream
Allow to view videos, images and music shared from another
device in your network.
Not connected
Show whether the Ethernet is connected.
Proxy settings
You can set the proxy server.
NOTE
HTTP proxy is used by the browser but may not used by other
apps.
IP settings
Configure the IP setting for your network connection.
Inputs
You can see the state of devices that the TV connected: Connected
Input, Standby Inputs and Not connected Input.
Consumer Electronic Control (CEC)
HDMI control
Allow the TV to control HDMI devices.
Device auto power off
Power off HDMI devices with the TV.
TV auto power on
Power on the TV with HDMI device.
NOTES
HDMI cables must be used to connect HDMI CEC-compatible
・
devices to your TV.
The HDMI CEC feature of the connected device must be turned
・
on.

Settings

icon to access the Settings.
If you connect an HDMI device that is not HDMI CEC-
・
compatible, all the HDMI-CEC Control features do not work.
Depending on the connected HDMI device, the HDMI-CEC
・
Control feature may not work.
Picture / Sound / Help / Parental Controls
See other chapters for more information about these settings.
Google Cast
Enables you to extend your app to direct its streaming video and
audio to the TV.
Apps
You can view details about an app or other item listed. The
information and controls available vary among different types of
apps.
Screen Saver
Enables screen saver when the TV is idle.
Usage Mode
Set the TV to use in Home or Store mode.
Wake Up
Wake on LAN
An application on your second screen with Wake on Wired LAN
will turn on your TV when you use the feature.
1.Your TV and the device must in the same LAN.
2.Click the screencast icon in the device's app (like YouTube).
The device displays the ID of all available devices.
3.Click on your TV name, the TV opens the app or casts the
contents on the app to the TV.
When the device casts the contents of app to the TV which in
standby mode, the TV automatically boots.
Wake on Wireless Network
An application on your second screen with Wake on Wireless
will turn on your TV when you use the feature. (See "Wake on
LAN" for more details.)
Wake on Cast
Wake up the TV with the cast function.
Send Diagnostics and Usage
Allow to send the diagnostics and usage of the report.
Setup assistant
Use the Setup assistant for instructions to help you set up your TV.
Storage & reset
You can view the TV storage and also you can reset to the factory
data.
17