Ferroli HE Instructions

http://waterheatertimer.org/Woods-timers-and-manuals-old.html#Remeha
Programmer overview
A: Clock adjustment button
B: Operating mode button
C: Override button
D: - Button
E: Programming button
F: + Button
Setting the time and day
1. Press the
2. The Day and clock symbol will flash on the display using the + and – buttons set the Day (1= Monday
7= Sunday)
3. Press the
4. The hour and clock symbol will flash using + and – buttons set the correct hour (this is a 24 hour clock)
5. Press the
6. The minutes and the clock symbol will flash using the + and – buttons set the correct minutes.
7. Press the
Pre Set programmes
1. Central heating.
The timer is Pre programmed with 3 on and 3 off times. Set the same for each day.
These are:
2. Domestic hot water ECO/Comfort
The timer is fitted with a function that will time the boilers hot water pre heat.
The pre heat will keep the hot water inside the boiler at its set temperature.
The timer is pre programmed with 1 on and off time. Set the same for each day.
This time is 6:30-22:30.
If these are suitable no programming is required and the C/H and the hot water comfort will be on for these
times.
Operating mode
By pressing the M button you can select: heating continuous, heating timed and heating off. When in these
modes the display will show.
Heating continuous
HE Programmer instructions
button.
button.
button.
button the time and day are now set.
The 2
(The C/H 12:00-12:00 programme will not fire the boiler.)
Heating timed
nd
on/off time will not allow the boiler to fire.
A B C
D E F
Heating off