PAC Handlelok 1004 Installation Instructions

P
ERFORMANCE
www.pactoolmounts.com
HANDLELOK P/N 1004
For additional assistance call 888-514-0083 between 8AM-5PM EST or email: info@pactoolmounts.com
To avoid the risk of personal injury, property damage or product damage, please use the included
fasteners for mounting.
* The bracket must be securely mounted to a stable surface and material.
* When mounting bracket to PAC TRAC aluminum products P/N 7000, P/N 7020, P/N 7040,
P/N 7050 with the included Trac Lok inserts P/N 7016, torque the screws to a maximum 15 in-lbs.
* PAC recommends regular and frequent inspections to be certain of proper operation and installation.
HORIZONTAL OR VERTICAL MOUNTNG
FIGURE 1
(Thru Mounting Method)
A C
DVANTAGE OMPANY
CAUTION
STANDARD MTG. HARDWARE
PAC TRAC MTG. HARDWARE
2 PIVOT PIN POSITIONS

INSTALLATION INSTRUCTIONS

¼-20 x 1 S.S.
P/N 3017
S.S. Pan Head Screw
P/N 2069LN
¼-20 S.S. Locking Hex Nut
#10-24 x 1 S.S.
P/N 2046
S.S. Pan Head Screw
P/N 7016
TRAC LOK INSERT
FIGURE 2
(PAC TRAC Mounting)
10-2018
INS-1004 rev A
QTY
2
2
QTY
2
2