Setting The Timer - Toastmaster TCM12CCAN Use And Care Manual

Setting The Clock With AM/PM Indicator
1. Plug the power cord into a wall outlet. The Display will flash until
time of the day is set.
NOTE: A power failure will also cause the Display to flash and it
will be necessary to reset the clock.
2. To set the clock, press the PROGRAM Button until "Set Time"
appears in upper left corner. Press the HOUR button to set correct
Hour, noting AM/PM. Press the MIN Button to set correct minutes.

Setting The Timer

1. Press the PROGRAM Button twice and display will show "Set
Timer" in upper right corner of the Digital Display. Press and hold
the HOUR Button until the correct hour is displayed for the brew
time you would like to set, noting that PM is indicated on the left
corner of the display. Indicator Display will go off in 5 seconds.
2. Press the MIN Button until the correct minute is displayed for the
the brew time you would like to set.
3. After the brew time is set, press AUTO Button once. The AUTO
light will illuminate indicating that your Coffeemaker is ready to
begin brewing at the pre-programmed time. Indicator Display will
go off in 5 seconds.
To Start Brewing Coffee Immediately
Press the Power Select Button. The Power Light will illuminate as the
Coffeemaker begins brewing the coffee.
To Start Brewing Coffee
At The Pre-programmed Time
At the preprogrammed time, the Coffemaker will turn itself on
automatically. The Power Light will turn on as the Coffeemaker
begins brewing and coffee will begin flowing into the Carafe.
9.