Oven Controls; Display Messages - Blodgett McDonald's KCO-25E Installation Operation & Maintenance

OVEN CONTROLS

1. POWER ON/OFF - Controls the operation of
the oven. If the power switch is lighted the power
to the unit is on. If the power switch is not lit, the
power to the unit is off.
2. DISPLAY --- Displays time and temperature and
other information related to oven function.
Time is displayed in minutes and seconds and
counts down.
3. START/STOP KEY --- Starts or stops the se-
lected product key program.
4. PRODUCT KEYS (1-6) --- Associates a time and
temperature with a specific product for each key.
5. PROGRAM KEY --- Accesses the program mode
to set or change the time or temperature of a
product key.
6. HEAT LIGHT --- Indicates that the elements are
operating.
1

DISPLAY MESSAGES

3 2
4
9
OPERATION
Indicates the oven is heating to, or cycling at
the idle temperature. (Temperature the
oven maintains when not in use).
Indicates the oven temperature is too high
for the selected product recipe. Wait until
is displayed.
Indicates the oven temperature is too low
for the selected product recipe. Wait until
is displayed.
Indicates the oven has reached the selected
recipe temperature. Ready for product load.
Indicates the number of pans of the same
product in one load.
Indicates the timer has counted down to
00:00 and the product is done.
Indicates the control is ready to accept the
code and enter the program mode.
Indicates the control has entered the pro-
gram mode.
Indicates the cook temperature for a prod-
uct key can be programmed.
Indicates the cook time for a single pan can
be programmed.
Indicates the cook time for two pans can be
programmed.
Indicates the cook time for three pans can be
programmed.
Indicates an open or shorted probe.
5 6