About this task
The figure indicates the location of the microphone and provides a visual representation of the installation procedure.
Steps
1. Align the screw hole on the integrated microphone assembly circuit board with the screw hole on the chassis.
2. Replace the screw (M2x5) that secures the integrated microphone assembly circuit board to the chassis and connect the microphone
cable to the connector on the system board. Close the latch to secure the cable.
Next steps
1. Install the
display
assembly.
2. Install the batteries.
3. Follow the procedure in
Front camera
Removing the front camera
Prerequisites
1. Follow the procedure in
2. Remove the batteries.
3. Remove the
display
assembly.
About this task
The figure indicates the location of the microphone and provides a visual representation of the removal procedure.
38
Removing and installing components
after working inside your
tablet.
before working inside your
tablet.