Page 2
Thank you for purchasing a Landport, ™ the container for what life brings you. We hope you love this charming delivery lockbox as much as we do. Sincerely, The Landport Team INSIDE FRONT COVER (THIS TYPE DOES NOT PRINT)
INSTALLATION Using the Keypad.................Pg. 11 What You’ll Find in the Landport...........Pg. 1 Battery Installation................Pg. 11-12 Landport Dimensions: Deluxe | Rectangle | Cube....Pg. 2 Placement Considerations..............Pg. 3 Locking Your Landport..............Pg. 11 Choose Number of Anchors to Use..........Pg. 4 Unlocking Your Landport..............Pg. 11 Safety Considerations ................Pg.
WHAT YOU’LL FIND IN THE LANDPORT LANDPORT DIMENSIONS & WEIGHT: DELUXE | RECTANGLE | CUBE Delivery & Pickup Model Dimensions Approx. Weight Please use LANDPORT GUIDE Deluxe 34” x 17” x 17” 50 lbs. find access code in second line of address or in your company's instructions.
PLACEMENT CONSIDERATIONS CHOOSE NUMBER OF ANCHORS TO USE You have the option to anchor Landport at 1, 2, 3 or all 4 points. We have A few things to consider when deciding where to install your Landport: included one anchor for you, but the decision is up to you. More anchors 1.
INSTALLATION METHODS If you are not comfortable installing Landport yourself, we suggest you seek a contractor or an experienced handyperson to do the job. For such a professional, installing Landport should be a quick and easy process. Masonry Drill Bit...
Page 7
3/8” bit, drilling ¼” the bolt should be up, such that the anchor bolt from inside the Landport. 3. Move Landport out of the way. more than the length of the anchor. wedge is in the bottom of the hole.
If you can’t access the underside of the wood porch or deck, you can secure LANDPORT CARE your Landport with 3/8” x 3” lag bolts. Drill a 5/16” pilot hole first. (Fig. 2) To clean Landport use a soft cloth, water and a nonabrasive mild detergent Note: We recommend using stainless steel hardware to prevent rusting.
UNLOCKING YOUR LANDPORT To unlock Landport use the key or the keypad. The keys can be used for regular operation of your Landport or as an override in case of a forgotten Access Code. Please do not store your keys in the Landport.
When the correct Access Code is entered, you will hear the keypad make 2 short beeps and the latch will release to unlock the Landport. PROGRAMMING MODE When you press the buttons in Programming Mode, you will hear 2 beeps for each button press.
NOTE: All Landports come with the preset Administrator Code of 7-7-7-7-7 and a preset Access Code of 1-3-5-7-9. Please change these codes prior to use or the items in the Landport will not be secure. CHANGING THE ADMINISTRATOR CODE IMPORTANT: Changing the Administrator Code resets all Access Codes.
ASSIGNING CODES TO KEYPAD POSITIONS IMPORTANT: Codes are assigned to positions. (Fig. 8) 1/2 = Position 1 - an Access Code and an Administrator Code 3/4 = Position 2 - an Access Code 5/6 = Position 3 - an Access Code 7/8 = Position 4 - an Access Code Pos.
SETTING THE ADMINISTRATOR CODE 2 short & 1 long beep Start over Press & hold 1 long Enter a Re-enter 5-digit 3 beeps the black 3 beeps beep 5-digit code code to confirm square button You are now Code received Code successfully in Administrator Code programmed and...
SETTING THE ACCESS CODES 1 long 1 long beep beep Start over, wrong Start over, code Admin. Code not confirmed Re-enter Enter 5-digit Constant Enter new 1 short new 5-digit 3 beeps 3 beeps Administrator Press & hold Press a button to 5-digit Code beep beep...
We sincerely want you to be happy with your purchase, and will work with you in good faith through any reasonable and unforeseen issues that affect The Codes can be changed at any time. See your Landport Guide. your Landport. The metal structure itself, including the steel and brackets,...
(THIS TYPE DOES NOT PRINT) where you can easily find at a later date. In the event that you do misplace the keys to your Landport, we can send you a replacement set for a minimal fee plus shipping. For more information, visit www.thelandport.com and click on Parts...