Magic Motion Remote Controller Check; 3D Pattern Test - LG 49LF6400-DA Service Manual

▪ Standard color coordinate and tem perature u s i ng
CA-210(CH-14) – by aging time
Normal line in Korea (From March to December) : LGD (LF5xxx,
LF6xxx, LF7xxx Series models)
Normal line in GLOBAL : LGD (LF5xxx, LF6xxx, LF7xxx Series
models)
Aging time
webOS X
(Min)
271
1 0-2 282
2 3-5 281
3 6-9 279
4 10-19 277
5 20-35 275
6 36-49 274
7 50-79 273
8 80-119 272
9 Over 120 271

5.3. Magic Motion remote controller Check

(Only LF65/LF70/LF72)
5.3.1 Test equipment
- RF-remote controller for check, IR-KEY-CODE remote
controller.
- Check AA battery before test. A recommendation is that a
tester change battery every lots.
5.3.2. Test
1) Make pairing with TV set by pressing "Mute (START) key"
on RCU.
2) Check a cursor on screen by pressing 'ENTER" or "OK" key
of RCU
3) Stop paring with TV set by pressing "VOL+ (STOP) key.

5.4. 3D pattern test

5.4.1. Test equipment
1) Pattern Generator MSHG-600 or MSPG-6100 (HDMI 1.4
support)
2) Pattern: HDMI mode (model No. 872, pattern No. 83)
5.4.2. Test method
1) Input 3D test signal as Fig.1.
2) Press 'OK" key as a 3D input OSD is shown.
3) Check pattern as Fig2 without 3D glasses. (3D mode
without 3D glasses)
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
Cool Medium Warm
Y X Y X
270 286 289 313
289 297 308 324
287 296 306 323
284 294 303 321
280 292 299 319
277 290 296 317
274 289 293 316
272 288 291 315
271 287 290 314
270 286 289 313
Y
329
5.5. HDMI ARC Function Inspection
348
5.5.1. Test equipment
346
- Optic Receiver Speaker
343
- MSHG-600 (SW: 1220 ↑)
- HDMI Cable (for 1.4 version)
339
336
5.5.2. Test method
333
1) Insert the HDMI Cable to the HDMI ARC port from the
master equipment (HDMI1)
331
330
329
2) Check the sound from the TV Set
3) Check the Sound from the Speaker or using AV & Optic
TEST program (It's connected to MSHG-600)
* Remark: Inspect in Power Only Mode and check SW version
in a master equipment
- 18 -
LGE Internal Use Only