Technical Data; Placing Into Operation - Pfaff SILVERLINE HRH S 2,0 L Translated Operating Instructions

Service Jack SILVERLINE HRH S
English
Daily examinations
 Visual and function examination of the security parts: head, non-return valve, pressure control
valve, drain valve.
Have the jack serviced by a qualified technician at least once a year.
Observe the inspection and servicing schedule.
Note that safe functioning cannot be guaranteed unless original accessories and spares are used.

Technical data

Type
Ref.-no.:
Lifting capacity
Lift
Quick lift
min. height
max. height
Lift per pump stroke
Functional description
The term "service jack" refers to a manually operated, transportable hydraulic lifting device.
A rotary load supporting plate supports the load.
The load is lifted by a swivelling load arm, which is mounted in the base frame on an articulated joint.
A hydraulic pumping device involving a lifting piston, non-return valve, overpressure valve, and lowering device for
the controlled release of the raised load performs the lifting process.
The jack has four rollers to enable the user to transport it easily without a load.
Operating precautions:
Note:
Use the jack only on adequately compacted (stable) ground.
The jack must not be used to transport loads.
Ensure that the jacking handle has room to move freely.
Use additional supports for working under the raised load.

Placing into operation

design „L" 3t; 5t
Remove the transportation
safety device and lift up the
pump lever support
Operating instructions
Never use the service jack as transporting device.
Park the vehicle you wish to lift on flat, compacted ground.

Chock the raised vehicle to ensure that it cannot roll away, slip, or otherwise fall off the jack.

The device should be located under the jacking points provided for the purpose by the vehicle

manufacturer and not under the vehicle directly.
The load support plate must be positioned centrally under the jacking point.

If necessary, use a non-slip, resilient surface.

If necessary use a non-slip, elastic

technische Änderungen vorbehalten
HRH S 2,0 K HRH S 2,5 K HRH S 2,0 L HRH S 3,0 L HRH S 5,0 L
040008530
2
[t]
260
[mm]
no
125
[mm]
h
min
385
[mm]
h
max
8,12
[mm]
design „L" 2t
Remove the transporta-
tion safety device
design changes under reserve
F 06.01.175
040008531 040008532
2,5 2
300 660 480
yes yes
140 140 125
440 800 605
5,9 14,6
at design „L"
Insert the pump lever
and fasten it with screw
and nut
changements techniques sous réserve
040008533 040008534
3
yes
17,7 12,2
only at design „L" 2t
Fasten the quick lift operating
lever with bolt and nut
8 / 12
5
415
yes
145
560