Timex 759-095003 User Manual

THANK YOU FOR PURCHASING YOUR TIMEX WATCH.
EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase
for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during
normal business hours. Payment must be made within 30 days of purchase. Name, address,
telephone number, purchase date, and 5-digit model number required. You can also mail a
check for $5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your Timex watch.
Your model may not have all of the features described in this booklet.
• Two time zones • Alarm • 24-hour countdown timer • 99-lap chronograph • Hourly chime
INDIGLO
MODE
Press MODE to cycle through CHRONO, ALARM, TIMER and TIME ZONE modes. Press INDIGLO
to illuminate watch face. When setting functions, press and hold SET to advance digits rapidly.
In any mode, press MODE to view time display. Press any button to stop alarm or timer beeps.
A. Press and hold SET. SECONDS digits will flash.
B. Press START/SPLIT to set SECONDS to 0.
C. Press MODE to select HOURS.
D. Press START/SPLIT to advance. Go through 12 hours for AM or PM
E. Press MODE to select MINUTES, then START/SPLIT to advance.
F. Repeat to set MONTH, DATE, DAY, 12- or 24-hour TIME display.
G. Press SET when done.
Press START/SPLIT to view TIME ZONE 2.
A. Press MODE to select CHRONO
B. Press SET to select Lap or Split display
C. Press START/SPLIT to start.
D. Press START/SPLIT to record lap time.
E. Press MODE to display lap or split time (automatic after 10 seconds).
F. Press STOP/RESET to pause.
G. Press START/SPLIT to resume
H. Press STOP/RESET to stop.
I. Press STOP/RESET to reset.
When CHRONO is running LAP or SPLIT appears in time display.
A. Press MODE to select ALARM
B. Press SET to select Time Zone 1 or 2
C. Press START/SPLIT to change.
D. Press MODE to select HOURS. Digits will flash.
E. Press START/SPLIT to advance. Go through 12 hours for AM or PM
F. Press MODE to select TENS of MINUTES.
G. Press START/SPLIT to advance. Repeat for MINUTES, Time Zone 1 or 2.
H. Press SET when done.
I. In ALARM Mode, press START/SPLIT repeatedly to turn ALARM and CHIME modes on or off.
When alarm time is indicated in appropriate time zone, watch will beep for 20 seconds, or until
a watch button is pushed. Alarm will repeat every 24 hours until deactivated.
A. Press MODE to select TIMER
B. Press SET to select TENS of HOURS. Digits will flash.
C. Press START/SPLIT to advance.
D. Press MODE to select HOURS.
E. Repeat to set TENS of MINUTES, MINUTES, TENS of SECONDS, and SECONDS
F. Press SET when done.
G. Press START/SPLIT to start timer.
H. Press STOP/RESET to pause, START/SPLIT to resume.
I. Press STOP/RESET again to reset.
Watch will beep when countdown ends.
A. Press MODE to select TIME ZONE 2.
B. Press and hold SET to set time. HOURS digits will flash.
C. Press START/SPLIT to advance. Go through 12 hours for AM or PM.
D. Press MODE to select MONTH, DATE, 12- or 24-hour TIME display. Press START/SPLIT to
advance.
E. Press SET when done
F. Press START/SPLIT to view TIME ZONE 2.
A. Press INDIGLO to illuminate watch face.
electroluminescent technology used in the INDIGLO® night-light illuminates entire watch face
at night and in low light conditions.
B. Press and hold INDIGLO for three seconds (beep will sound) to activate or de-activate
NIGHT-MODE®
C. While in NIGHT-MODE®, press any button to illuminate watch face for 3 seconds
www.timex.com
W-3
FEATURES
BASIC OPERATIONS
START/SPLIT
OR
ALARM ON
SET
OR
STOP/RESET
TIME AND DATE
CHRONOGRAPH
Lap Pause
ALARM AND CHIME
COUNTDOWN TIMER
TIME ZONE
INDIGLO® NIGHT-LIGHT WITH NIGHT-MODE®
759-095003
INDIGLO
MODE
STOP/
RESET
SET
START/SPLIT
Split Pause