Table of Contents
Advertisement
2. Loosen the two screws (M2x3) that secure the display panel to the display back-cover and antenna assembly.
3. Lift the display panel and turn it over.
NOTE:
Do not pull and release the Stretch (SR) Tapes from the display panel. The display hinges and brackets are
shipped together with the display panel as an assembly and do not need to be separated from the display panel.
4. Peel the tape adhering the display cable to the back of the display panel.
5. Lift the latch and disconnect the display cable from the display-panel cable connector.
6. Lift the display panel away from the display back-cover and antenna assembly.
Removing and installing components
65
Advertisement
Table of Contents
