Operating The Monitor - Iiyama ProLite Series User Manual

OPERATING THE MONITOR

To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 40. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 29 for SCREEN ADJUSTMENTS.
Press the MENU button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the
Select the Menu item of the adjustment you want to make. Press the OK button on
the remote control or ENTER button on the monitor and enter the menu page. Then,
use the / buttons to highlight the desired adjustment item.
Press the OK button on the remote control or ENTER button on the monitor again.
Use the / buttons to make the appropriate adjustment or setting.
Press the EXIT button to leave the menu, and the settings you just made would be
automatically saved.
For example, to correct for vertical position, select Menu item of Screen. Select "Screen" by
using the /
Screen" by using the
"V. Position" by using the
Use the / buttons to change the vertical position settings. The vertical position of the
overall display should be changing accordingly while you are doing this.
Screen
Aspect
Setting
Adjust Screen
L a n g u a g e
Touch Feature
Network Settings
Control Setting
S t e M o i n o t I r D
Energy Saving Settings
Aspect
VGA Settings
Freeze
ENTER
Move
/OK
Press the EXIT button on the remote control lastly, it ends, all changes are saved in the memory.
NOTE
 The EXIT button on the remote control can be used to return previous menu item.
 Any changes are automatically saved in the memory when the On Screen Display disappears.
Turning off the power should be avoided while using the Menu.
 Adjustments for Image Position, Clock Frequency and Phase are saved for each signal timing.
Except for these adjustments, all other adjustments have only one setting which applies to all
signal timings.
22 OPERATING THE MONITOR
Picture
Picture Mode
Backlight
Contrast
Brightness
Chroma
Phase
Sharpness
Color Temp.
Reset
Move
buttons. Press the OK button on the remote control. Next, select "Adjust
/ buttons. Press the OK button on the remote control. Then, select
/ buttons.
Normal
E n i l g h s
Off
RS-232C
1
Full
Off
Enter EXIT Exit
/ buttons.
Standard
100
80
50
50
50
5
Custom
ENTER
Enter EXIT Exit
/OK
Screen
Auto Adjustment
VGA Settings
Phase
Clock Frequency
H. Position
H. Position
V. Position
V. Position
Phase
Clock Frequency
Auto Adjustment
Move
34
0
50
50
ENTER
Enter Exit
EXIT
/OK