Programming The Remote Control - LG 32LB1D Owner's Manual

9U1004A_03 06/6/27 2:11 PM
APPENDIX

PROGRAMMING THE REMOTE CONTROL

The remote is a multi-brand or a universal remote. It can
be programmed to operate most remote-controllable
devices of other manufacturers.
Note that the remote may not control all models of other
brands.
1
To find out whether your remote can operate the
device without programming, turn on the device such
as a VCR and press the corresponding mode button on
the remote.
After that, press the POWER button. If the device is
turned off then it responds properly and the remote
need not to be programmed.
If not, the remote should be programmed to operate
the device. The programming procedures are explained
below.
Press the MENU and MUTE button continuously at the
2
same time for 2 seconds, the current selected device
button will be illuminated.
If you don't press any button for 20 seconds, the light
on the mode button will be turned off. In that case,
you have to repeat from step 2.
3
Enter code numbers using the number button on the
remote by referring the code table on the following
pages. When pressing the button, the light blinks at a
time.
If the device turned off, the programming is successful.
Press the MENU button to store the code. After blink-
4
ing twice, this code is stored.
Test the remote functions to see if the device responds
5
properly. If not, repeat from step 2.
98
Page 98
D/A TV INPUT
POWER
DVD
ARC
i
TEXT
OK
VOL PR
MUTE FAV
1 2 3
4 5 6
7 8 9
LIST Q.VIEW
0
I/II