After Each Use - Remington PG6045 Manual

ENGLISH
, Trimming body hair
• Attach Body Hair trimmer attachment head.
• To achieve the desired hair length, change the guide comb by easily sliding
it onto one of the three slots on the attachment head. The different slots
represent 3mm, 6mm & 9mm hair lengths.
• Place the flat top of the trimmer comb against the skin.
• Slowly slide the trimmer through the hair, in the direction of hair growth.
• Use slow and well-controlled movements.
• If hair builds up in the guide comb during the trimming process, switch the
unit off, pull off the guide comb. Brush trimmer / rinse comb.
, Removing body hair
• To remove the hairs completely;
• Trim the hair down to 1.2mm without attaching the guide comb and then
change to the mini foil attachment head.
• Stretch your skin with your free hand so hairs stand upright.
• Only apply light pressure on the shaving head whilst shaving.
• Shave against hair growth.
C CARE FOR YOUR GROOMER
• Care for your product to ensure a long lasting performance. We recommend
that you clean your groomer after each use.
• The easiest and the most hygienic way to clean the groomer is by rinsing the
product head after use with warm water.

, AFTER EACH USE

• Rinse the accumulated hair from the cutters and shake off excess water.
Alternatively, use a brush.
• Gently tap on a flat surface to remove hair particles, and brush the
remaining hairs away.
• Place one or two drops of cutter oil or sewing machine oil on the blades.
• Turn the clipper on to distribute the oil evenly, wipe off any excess oil.
• Wipe the main unit with a damp cloth and dry immediately.
, Note: do not get the groomer handle wet.
• Ensure that the groomer is turned off when applying the oil or rinsing under
the tap.
7