Table of Contents
Advertisement
Note: Do not change any of the projector names or IP addresses, or the images will not be adjusted
automatically.
Parent topic:
Related tasks
Configuring Tiling Manually
Configuring Tiling Manually
If your projectors are not on a network or you were unsuccessful tiling the images automatically, you can
configure tiling manually.
1. Turn on the projector.
2. Press the Menu button.
3. Select the Extended menu and press Enter.
4. Select Multi-Projection > Tiling > Layout.
5. Select the number of rows and columns you are setting up as the Row and Column settings. Then
select Set and press Enter.
6. Repeat the previous steps with each projector you are setting up before continuing with the next
step.
Tiling Images into One Image
172
Advertisement
Table of Contents
