IBM Power Systems RDX Manual page 31

Figure 13. Installing the internal RDX docking station sleeve into a stand-alone system
7. Remove the internal RDX docking station from the static-protective package.
8. Locate the RDX Air Block, part number 01GY504 in the FRU kit. Remove the adhesive protective
cover and apply the Air Block to the rear of the internal RDX docking station.
9. Align the internal RDX latch with the holes on the bottom of the internal RDX docking station.
10. Hold the internal RDX latch in place while sliding the internal RDX docking station into the system.
RDX docking stations, removable disk drives, and power cable, for the 9009-41A, 9009-42A, or 9223-42H 17