Table of Contents
Advertisement
Quick Links
swanstone.com
m Product Warnings
m Safety Guidelines
m Kit Contents
m Required Tools
m Preparation Tips
m Installation Procedure
m Cleaning & Maintenance
m Surface Repair
m Warranty Information
Cabinet Mount Vanity Tops & Bowls
Models:
Chesapeake Vanity (Single Bowl)
Chesapeake Vanity (Double Bowl)
Contour Vanity (Single Bowl)
Ellipse Vanity (Single Bowl)
Ellipse Vanity (Double Bowl)
Europa Vanity (Single Bowl)
Form #255-05-16
Advertisement
Table of Contents
Summary of Contents for Swann Chesapeake Series
- Page 1 Cabinet Mount Vanity Tops & Bowls swanstone.com Models: Chesapeake Vanity (Single Bowl) Chesapeake Vanity (Double Bowl) Contour Vanity (Single Bowl) m Product Warnings Ellipse Vanity (Single Bowl) m Safety Guidelines Ellipse Vanity (Double Bowl) m Kit Contents Europa Vanity (Single Bowl) m Required Tools m Preparation Tips m Installation Procedure...
-
Page 2: Safety Guidelines
Safety Guidelines IMPORTANT NOTICE The Swan Assurance — if our product is IMPORTANT NOTICE: Indicates that equipment or property properly installed and maintained, as stated in damage can result if instructions are not followed. these instructions, it will not leak. Remember –... - Page 3 Safety Guidelines Personal Protection Dust Hazard Be sure to use all personal protective When cutting or drilling the Swanstone product, equipment, such as sturdy work boots, use a dust collection method which prevents preferably with steel toes, gloves, and hard hat, if necessary, dust particles from going into the air.
-
Page 4: General Information
General Information Sink Contents Contour Vanity (Single Bowl) Confirm that all parts for the vanity top or bowl have been included before beginning installation. Chesapeake Vanity (Single Bowl) CTVSB-01 CV-2225 (22”D x 25”W) CV-2231 (22”D x 31”W) CV-2237 (22”D x 37”W) CV-2243 (22”D x 43”W) CVSB-01 CV-2249 (22”D x 49”W) -
Page 5: Installation Procedure
General Information Installation Procedure Europa Vanity (Single Bowl) Unpack Carton mUse care when opening the box not to damage the sink. mThis product is shipped to you or your retail center after careful inspection. After purchasing the sink, carefully unpack and inspect the product for any shipping damage that may have occurred. - Page 6 Installation Procedure Installation Procedure 1. If necessary, identify the location of additional holes for the faucet or other accessories and drill a 1/4” pilot hole from Disclaimer the back side of the sink. mThe information contained in this Installation Manual is given free of charge.
- Page 7 Installation Procedure 2. Drill fixture hole(s), using the 1/4” pilot hole for a guide, with 2. Clean underside of vanity sink with denatured alcohol. a 1-3/8” hole saw. Remove all dust and allow the surface dry completely. D e n a t u r e d A lc o h VI-008...
- Page 8 Installation Procedure 4. Place Swanstone vanity top onto the cabinet, making sure IMPORTANT NOTICE vanity is seated properly. To prevent breakage or distortion of the overflow assembly, do VI-006 not use oil-based caulking or plumber’s putty near the overflow assembly. Oil-based plumber’s putty will have a harmful effect on the plastic overflow assembly, resulting in a leak.
- Page 9 Installation Procedure 10. Connect the faucet supply lines per the manufacturer’s WARNING instructions. Dust Hazard When sanding Swanstone product, use a dust collection method which prevents dust particles from going into the air. Always work in a well-ventilated area. To keep the area well ventilated, open windows and use exhaust fans.
- Page 10 Installation Procedure 5. Caulk all seams between wall and side/back splash to 5. Drill starter hole inside of cutout line. create a moisture barrier. If desired, use a proper color- VI-030 matched silicone sealant (not included). 6. Use a saber saw to cut inside of cutout line. VI-014 The installation is now complete.
- Page 11 Installation Procedure Undermount Installation VI-036 Note: If undermount installation is required to be ADA compliant, refer to the wall mount installation and ADA sections. Note: Steps 1 through 3 are working from top of the countertop. 1. Position template on countertop in desired location. 2.
- Page 12 Installation Procedure 8. Attach the sink with clips and screws. Loosely tighten the 14. Connect the faucet supply lines per the manufacturer’s screws. instructions. VI-037 VI-011 9. If mounting the bowl with an undermount overlap, bowl 15. Connect the drain lines and p-trap per the manufacturer’s should be positioned, as shown.
- Page 13 Installation Procedure ADA Installation Recommendations IMPORTANT NOTICE To prevent breakage or distortion of the overflow assembly, do In order to comply with ADA requirements, the lavatory must not use oil-based caulking or plumber’s putty near the overflow have adequate floor clearances in front of the sink. It must assembly.
-
Page 14: Maintenance And Cleaning
Installation Procedure Maintenance and Cleaning Care and Cleaning Accessibility Requirements The Swanstone products are stain and abrasion resistant; Note: Only lavatory installations in a public space must comply with the knee and toe clearance however, the finish requires reasonable care. dimensions,however we recommend these standards Because cleaning products change over time, always check be used for both private and commercial installations. - Page 15 Warranty Warranty If a Swan product covered by this warranty is found to be defective in materials or workmanship, after inspection by an authorized Swan Corporation representative, we will repair, or at our option, exchange the product for a similar model. This warranty extends for a designated period of time, so long as it remains in use in its original place of installation.
- Page 16 Swan 800-325-7008...
- Page 17 800-325-7008 Swan...
- Page 18 Save these Installation Instructions for future reference. They provide important information on cleaning, maintenance, and surface repair of the Swanstone Products. www.swanstone.com Form #255-05-16...