Getting Acquainted - Baofeng UV-6 User Instruction

Getting Acquainted

A. State Indicator: the green light keeps lighting while receiving a selected signal. The red light twinkles
while receiving designated signal. Red light twinkles while the transmitting is to be time out , green
light twinkles while scanning.
B. Channel selector: Rotate to select channels. In the different positions, press PF1 to switch on or off a
variety of functions, and channel group code selection.
C. PWR/VOL Switch: Turn clockwise to switch on the transceiver. Turn counterclockwise to switch off
the transceiver. Rotate to adjust the volume level.
D. PTT (Push-To-Talk) Switch: Press and hold PTT button to call a station, then talk to the microphone
in your normal voice. Release it to receive a call.
E. Function Button (PF1): According to different switch positions of channel number, press this button
to switch on the transceiver to turn on or off a variety of functions, and channel group code selection.
During the state of dual watch, it is PTT button of designated channel (Written by PC programming
software)
F. MONI Button (MONI): Press and hold this button to monitor circularly the signal from the selected
channel and designated channel,
G. Speaker /Microphone rubber plug: Cover the jack while SP & MIC is free.
Power On:
Rotate PWR/VOL Switch clockwise, you will hear a sound "Beep",
report the present channel, the transceiver is ready for working
Adjusting Volume:
Press and hold MONI button, meanwhile rotate PWR/VOL Switch
to adjust the volume
Channel Selection:
Rotate Channel Selector to select your channel or select
a new channel, (Press PF1 to power on) to turn on or off other functions
PTT Button: Press and hold PTT button to call a station,
then talk to the microphone in your normal voice.
Note:
Keep the Microphone approximately 1.5 inches (3-5cm) from your lips
文件使用
PDF " pdf Fact or y Pr o"
4
试用版本创建
www. f i nepr i nt . cn