General Description
Installing Batteries in the Remote Control
Installing Batteries
Open the battery compartment
1
cover on the back side.
Insert two 1.5V AAA size batteries
2
in correct polarity. Don´t mix old or
used batteries with new ones.
3
Close the cover.
External Connection
Antenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be connected
to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder cable, you need to
use the 300ohm/75ohm converter to connect the antenna cable to the antenna jack. For details
please refer to the following drawing.
Antennas with 300 W flat twins Leads
Use a 75ohm - 300ohm converter
300ohm coaxial cable
Antenna feeder
Point the remote towards the remote control
sensor of the TV and use it within 8 meters.
Do not put used batteries in your household
rubbish as this can negatively affect the
environment. Contact your local council for
battery recycling options.
Antennas with 75 W Round Leads
75ohm coaxial cable
14
Antenna cable