Miele HS19 Operating Instructions Manual page 6

Warning and Safety instructions
Technical safety

The vacuum cleaner operates at 25.2 V.
It is classified as a class III appliance.
This appliance is supplied by a safety extra-low voltage (SELV)
power source where the voltage is low enough to protect users from
the risk of electrical shock. A Class II charger is used for supplying
power to charge the vacuum cleaner.

Before using the vacuum cleaner and its accessories, check for
any visible signs of damage. Do not use a damaged appliance.

Compare the connection data on the data plate of the charger
(voltage and frequency) with that of the mains electricity supply. This
data must match exactly. Without modifications, the charger is suit-
able for 50 Hz and 60 Hz.

The mains electrical plug must be fitted with an appropriate fuse.

The Miele Multi Floor XXL Electrobrush and the Miele Elec-
tro Compact handheld brush (varies according to the model) are ad-
ditional motor-driven devices designed specially for this Miele va-
cuum cleaner. For safety reasons, the vacuum cleaner must not be
used with a different Miele Electrobrush/handheld brush or an Elec-
trobrush/handheld brush produced by another manufacturer.

Store the vacuum cleaner at an ambient temperature between
0 °C and 45 °C.

While the vacuum cleaner is under warranty, repairs should only
be undertaken by a Miele authorised service technician. Otherwise
the warranty will be invalidated.

Repairs should only be carried out by a Miele authorised service
technician. Repairs and other work by unqualified persons can cause
considerable danger to users.
6