Loading A Disc - The Singing Machine SMDigital iSM-370 Instruction Manual

CD OR CD+G OPERATIONS
PREPARATION
• This unit is designed to play CDs/CD+Gs bearing the identification logo "
CD+Gs do not conform to the CD standard, they may not play properly.
• Fingerprints and dust should be carefully wiped off with a soft cloth. W ipe in a straight motion
from the center of the disc to the outside edge.
• Never use chemicals, such as record cleaning sprays, antistatic sprays or fluids, benzene or
thinner to clean compact discs. These chemicals will permanently damage the plastic surface
of the disc.
• Always place the compact disc on the disc tray with the label facing upward. Compact discs
can be played on only one side.
• To remove a disc from its storage case, press down on the center of the case and lift the
disc out, holding it carefully by the edges.
• Discs should be returned to their cases after use to protect them from dust and scratches.
• To prevent warping the disc, do not expose it to direct sunlight, high humidity or high
temperatures for extended periods of time.
• Do not apply paper or write anything on either side of the disc. The inks used in some felt-tips
pens may damage the surfaces of the disc.
PLAYING CD OR CD+G DISC
• Press FUNCTION button on the unit or CD/CDG button on the remote to select CD/CDG mode.
• Adjust MASTER VOLUME control on your unit, TV or audio system to a comfortable level.
• Adjust MIC VOLUME/A.V.C./ECHO/KEY controls as needed to achieve the desired mix of
music and vocals through your sound system.
• Do not press the disc cover of the CD compartment while it' s playing.
• Never place anything except a compact disc on the disc tray. Foreign objects can damage the
unit.
• Do not apply excessive force to disc cover.
• Only place one disc on the disc tray at a time.

LOADING A DISC

• Lift up CD door to open CD/CDG compartment door. Place a disc in the compartment
with the printed side facing toward you.
• Gently close the CD door to the CD/CDG compartment. After a few seconds, The unit begins
to read the disc. After that, the disc is playing automatically. (If no disc is loaded, it will display
" ").
(Refer to the Trouble Shooting Guide on page E22 if a disc is loaded but it does not
work normally.)
E 17
/ ". If CDs/