The Singing Machine SMVG-600 Owner's Manual page 19

TROUBLE SHOOTING GUIDE
PROBLEM
No sound - If audio is
going through TV or
VCR.
No song lyrics appear
on screen.
Picture is jumping up.
No image display on
Singing Machine's
monitor.
No sound from mic.
Please call Customer Service at 954-596-1110 if the Trouble Shooting Guide information
doesn't correct your problem.
Servicing of a Singing Machine by an unauthorized repair facility will void your warranty. The
Singing Machine cannot guarantee future repairs on machines that have been tampered with by
unauthorized personnel.
POSSIBLE CAUSE
Source Selection on TV or
VCR is not correct.
Video cable is not connected
properly to the TV.
Source selector on TV is not
set to VIDEO.
TV does not have video line
input.
A CDG is loaded but the
CDG indicator is not lit.
VERTICAL HOLD Control is
not set correctly.
The Camera Lens is down.
Monitor Selector is not set
properly.
Mic volume control.
Mic is off.
18
SOLUTION
Follow directions on page 10 for
'Video Connection'.
Connect the video cable to the
Singing Machine's VIDEO OUT
and to the TV VIDEO IN.
Using your TV Remote to select
VIDEO input.
Connect from VIDEO OUT of the
system to the VIDEO IN of your
VCR or Connect to an RF
Modulator and then to the TV
cable input. Refer to "Making the
Connections" on page 9.
Check the disc to be sure it is a
CDG. (See page 5 for details)
Check disc to be sure it is clean.
(See page 16 for cleaning
instructions.)
Adjust the VERTICAL HOLD
Control.
Lift up a Camera Lens.
Set MONITOR Selector to
CAMERA mode.
Adjust mic volume to max. Then
back it off to a comfortable level.
Turn on mic with the ON/OFF
switch located on the microphone.