Table of Contents
Advertisement
INTRODUCTION
Please read these instructions carefully before using this product and retain them in a
safe place for future reference.
POWER SUPPLY
This Product can be powered by either AC240V~50Hz Mains supply or by 6 R14 (C size)
Alkaline batteries.
AC OPERATION
1.
Remove the AC cord which is packed inside the product.
2.
Connect the cord to the AC input socket.
3.
Connect the mains plug to a household AC socket.
BATTERY OPERATION
1.
Insert 6 R14 (C-size) batteries (not supplied) Alkaline type recommended into the battery
compartment observing the correct polarity as indicated.
2.
Ensure compartment cover is securely fitted.
3.
Product will only function from batteries once the AC cord is removed from the unit.
4.
When replacing flat batteries, ensure all batteries are replaced at the same time with the
same type.
5.
If the product is not to be used for an extended period of time the batteries should be
removed to prevent any possible damage to the product.
USING THE RADIO
1.
Switch the FUNCTION selector to either FM or AM as required.
FM BAND
2.
If FM is selected ensure the telescopic antenna is fully extended and positioned vertically.
Turn the TUNING control until the desired station is located.
3.
4.
If the station is broadcasting in stereo, the stereo indicator will illuminate. To listen to a
broadcast in stereo.
5.
To achieve optimum reception adjust the position of the telescopic antenna.
AM BAND
6.
For AM reception the product has a built-in antenna, to achieve best reception the
product should be rotated, until the strongest signal is obtained.
GENERAL
7.
Once the required station has been located, adjust the VOLUME control to the desired levels.
USING THE CASSETTE
NORMAL PLAYBACK
Switch the function selector to TAPE.
1.
2.
Press the STOP/EJECT key to open the cassette compartment and insert a prerecorded
tape, with the exposed portion of the tape upwards and the full spool on the right Gently
push the door to close.
3.
Press the PLAY key to start playback.
4.
Adjust the VOLUME control to the desired levels.
To briefly suspend playback press the PAUSE key, releasing it resumes playback.
5.
6.
To advance or rewind the tape rapidly use the FAST FORWARD or REWIND keys.
To stop playback press the STOP/EJECT key, press it fully down to eject the cassette.
7.
Note: When the cassette reaches it's end during playback or recording, the
mechanism will stop and the keys return to their normal positions.
4
Advertisement
Table of Contents
