Backing; Mounter - Epson SpectroProofer Mounter 24 User Manual

SpectroProofer Mounter 24"/44"
❏ Use ILS20EP/ILS20EPUV and the white
calibration tile contained in the set that comes
with this product.
ILS20EP/ILS20EPUV and the white
calibration tile are adjusted to be a set, and
given the same number in the factory. If you
purchase two or more products, make sure
that you use the same numbered devices in
pairs.
The label of ILS20EP/ILS20EPUV
The label of the white calibration tile

Backing

Take care to prevent a scratch or dirt getting on
the surface of the backing.
If a scratch, dirt or other matter gets on the
backing, it may affect the color measuring result.
Caution:
c
Do not drop or knock it against hard objects
because the backing is a fragile part.
User's Guide
Introduction

Mounter

Do not touch the following parts when the power
is on.
Unnecessary touching the inside of the mounter
may damage the product.
8