Table of Contents
Advertisement
Connecting with an HDMI (ARC) cable
Connect an HDMI cable from an external digital audio system.
ARC enables the TV to directly output the digital sound through
an HDMI cable. Please note that it works only when the TV is
connected to the audio receiver that supports the ARC (Audio
Return Channel) function.
NOTE
•
When this port is used as the ARC function, it can be used
as signal input when DVD is connected to amplifier and the
amplifier is connected to the TV at the same time. (Some
amplifiers may not support series connection.)
Connecting with an HDMI cable
Connect an HDMI cable from an external A/V equipment.
Some Devices such as DVD player require HDMI signal to be set
to output in the device's settings. Please consult your device user
manual for instructions.
Please note that the HDMI connector provides both video and audio
signals, it's not necessary to connect an audio cable.
Common Interface
Insert the CI+ module for watching scrambled services like pay-tv
channels or some HD channels.
CARD FACE FRONT
COMMON INTERFACE
NOTE
•
Before you insert/remove the CI+ module, ensure that the TV
is switched off. Then insert the CI card into the CI+ module in
accordance with the Service Provider's instructions.
•
Do not repeatedly insert/remove the CI+ module as this may
damage the interface and cause a malfunction.
•
You must obtain a CI+ module and card from the service
provider of the channels you want to watch.
•
Insert the CI+ module with the SmartCard in the direction
marked on the module and SmartCard.
•
CI+ is not supported in some countries and regions, check with
your authorized dealer.
Getting started
2
1
CAM CARD
SMART CARD
Connecting with an USB cable
Connect the USB devices such as hard drives, USB sticks and
digital cameras for browsing photos, listening to music, watching
videos.
NOTE
For the media which has subtitle, you can switch between subtitle
languages by choosing character icon from media info bar and
switch between subtitle languages.
•
Support the U disk 4G, 8G, 16G, 32G, 64G, 128G and other
common market size, 2T hard drive is currently supported.
•
Support format: NTFS, FAT32.
Using the USB storage device function
The USB storage device function can be used to record and view
digital broadcast programmes.
Read the precautions below before recording or viewing
programmes using the USB storage device function.
NOTE
•
Be sure to select the correct country/region for use.
Use of the recording function may not be possible depending on
the selected country/region.
Use with incorrect settings may violate certain laws or other
regulations, and may result in criminal punishment.
In such cases, TOSHIBA CORPORATION and the TOSHIBA
Group shall bear no responsibility whatsoever. Do not repeatedly
insert/remove the CI+ module as this may damage the interface
and cause a malfunction.
•
Recorded programmes saved on the USB storage device
can only be viewed on this TV. They cannot be viewed when
connected to another TV(including the same model of TV), a PC,
or other device. Insert the CI+ module with the SmartCard in the
direction marked on the module and SmartCard.
•
You cannot watch one channel while recording another.
•
If the recording time to the USB storage device is too short, no
data may be saved.
•
You cannot record video input signals on the USB device.
•
Not all types of broadcast may be recordable.
•
After programming the TV to record digital broadcasting, do not
disconnect the power plug before recording starts.
•
Should video or audio recording fail due to malfunction of the TV
or poor reception, no compensation shall be paid.
9
Hide quick links:
Advertisement
Table of Contents
