Related Manuals for Interlogix TruVision TVC-M2-WM
Summary of Contents for Interlogix TruVision TVC-M2-WM
- Page 1 TruVision Box Camera Outdoor Housing with Heater (TVC-OH2-H) and Wall Mount (TVC-M2-WM) Installation Instructions Dimensions Internal Space: Housing: Accessories: Camera base plate dimensions P/N 1073110-EN • REV C • ISS 02FEB17 1 / 4...
- Page 2 Supported cameras Screw A: 1/4 - 20 UNC × 10, 2 pcs Used to attach the box camera to camera base plate. The housing can be used with the following box cameras: TVI/Analog Box TVC-4401, TVC-2401 Camera IP Box Camera TVC-1201, TVC-3201, TVC-1202, TVC- 3202, TVC-5401, TVC-5402, TVC-5403...
- Page 3 Note: You must install the appropriate lens on the box camera before this step. Please choose a lens with specifications that are suitable for the application. Install the camera and base plate assembly in the housing. Tighten the four screws to keep the camera assembly firmly in place.
- Page 4 Zoom Certification Copyright © 2017 United Technologies Corporation. All rights reserved. Interlogix is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation. Contact information Focus For contact information, see www.interlogix.com or Close the cover of the housing and fasten the www.utcfssecurityproducts.eu.