A. EVIDTM 12.1P B. Wall/Corner Mounting Bracket C. (4) Rubber Mounting Feet D. (2) Speaker Mounting Clips E. Eyebolt F. Right Angle Power Cord G. Owners Manual H. Warranty Card Figure 4: EVID 12.1P Packing List Electro-Voice ® EVID 12.1P User Manual...
Do not attach the safety line to the bracket! The safety line should prevent the speaker from falling if the bracket tears loose from the wall. Secure the other end to the eyebolt that is fully threaded into the enclosure. Electro-Voice ® EVID 12.1P User Manual...
Using a #3 right-angle Phillips screwdriver, securely tighten the second Phillips-head screw. Gently rotate the EV® logo a quarter turn and press firmly at its center to seat it securely into its mounting hole. See Figure 9. Electro-Voice ® EVID 12.1P User Manual...
Step 5: Test System Operation After all connections are made test the complete system operation. Appendix C on page 10 contains a troubleshooting guide to assist in locating a variety of speaker related problems. Electro-Voice ® EVID 12.1P User Manual...
EVID 12.1P only. Do not use it for any other purpose. Never set anything on, or hang anything from, the EVID 12.1P enclosure when using this bracket. For a copy of the model-specific CE Declaration of Conformity, contact Electro-Voice at the address listed at the end of this manual. Maintenance Your EVID...
Excluded Product repair or replacement and return to the customer are the only remedies provided to the customer. Electro-Voice® shall not be liable for any incidental or consequential damages including, without limitation, injury to persons or property or loss of use. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Most of these can be isolated and fixed with small, strategically placed bits of foam tape. Others may require driving additional nails or screws and perhaps some caulking to dampen their sympathetic movement. Electro-Voice ® EVID 12.1P User Manual...
Replace the hatch cover and tighten the four screws. Locate the small center hole, properly orient the EV® logo, and press it firmly into place at its center to reseat it in the mounting hole. Electro-Voice ® EVID 12.1P User Manual...
Make sure that all of the terminals on cable connectors have been properly soldered. If these suggestions do not solve your problem, contact your nearest Electro-Voice dealer or Electro-Voice distributor. Electro-Voice ®...
Mounting Bracket and Hardware Dim (H x W x D): 16.25" x 23.0" x 12.0" (412 mm x 584 mm x 305 mm) Net Weight: 49.0 lbs (22.2 kg) 1/8 Space (Corner Mounting) @ 1 Meter Electro-Voice ® EVID 12.1P User Manual...
Page 15
All manuals and user guides at all-guides.com Notes Electro-Voice ® EVID 12.1P User Manual...