Troubleshooting - Philips PR702 User Manual

9

Troubleshooting

Warning
•
Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
No power
•
Ensure that the AC power plug of the
Bluetooth alarm clock is connected properly.
• Ensure that there is power at the AC
outlet.
No response from the Bluetooth alarm clock
• Disconnect and reconnect the AC power
plug, then turn on the Bluetooth alarm
clock again.
Alarm does not work
• Set the clock/alarm correctly.
EN 12