Advertisement
If the TouchCube is still stuck or frozen, you can perform a second level reset by pressing
the Undo Mode cubie and holding it down for 1.5 seconds. Then, while holding down the
Undo Mode cubie, press and hold down the On/Off cubie for 1.5 econds. The TouchCube
will flash and then reset. If your TouchCube continues to malfunction for any reason after a
second level reset, turn it off and leave it powered down for 5 minutes. When you restart
your TouchCube, it will operate normally.
NOTE: You will lose your current puzzle if you perform a second level reset.
FIND OUT THE LATEST UPDATES AT RUBIKSTOUCHCUBE.COM
To learn helpful playing tips & solving strategies and get the latest news & updates about
your TouchCube, visit www.rubikstouchcube.com.
For further customer service information or to learn more about our other award-winning
products, please visit our website at www.technosourceusa.com.
CARING FOR YOUR TOUCHCUBE
Read all safety instructions for the product and all accessories before using. Techno
Source is not responsible for the operation of third-party accessories or their compliance
with safety and regulatory standards. Before you use the TouchCube for the first time,
please charge the battery completely. Charge time is approximately 8 hours for a full
charge. For a longer battery life, we recommend that you charge the TouchCube only when
it is completely out of batteries.
When using the charging display stand to charge the TouchCube, make sure that the power
adapter is plugged securely into the stand and a power outlet. Place the TouchCube in the
charging display stand ensuring that the contact points have met up. Do not use any power
adapter other than the adapter included in this package to charge the TouchCube.
8
Advertisement
