Advertisement
Hazardous Voltage.
Hazardous Voltage.
Will cause death or serious injury.
Will cause death or serious injury.
Turn off and lock out all power supplying this device before
Turn off and lock out all power supplying this device before
working on this device.
working on this device.
Replace all covers before power supplying this device is
Replace all covers before power supplying this device is
turned on.
turned on.
EX: HDP3M150.
DG
[3VL2515 - 2KK30 - 0AA0]
Motor Full Load Amps
35 - 50
42 - 60
48 - 70
55 - 80
62 - 90
69 - 100
58 - 83
69 - 100
81 - 117
92 - 133
104 - 150
(115 - 150) See Footnote
96 - 139
(115 - 150) See Footnote
(135 - 150) See Footnote
(135 - 150) See Footnote
(135 - 150) See Footnote
(135 - 150) See Footnote
46 - 67
55 - 80
65 - 93
74 - 107
83 - 120
92 - 133
77 - 111
92 - 133
108 - 156
123 - 178
138 - 200
154 - 222
135 - 194
162 - 210
188 - 220
215 - 241
(242 - 250) See Footnote
(242 - 250) See Footnote
-These settings are provided for starting currents greater than 11X but not to exceed 17X.
Technical Support:
Technische Änderungen vorbehalten. Zum späteren Gebrauch aufbewahren.
Subject to change without prior notice. Store for use at a later date.
Tensión peligrosa.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Puede causar la muerte o lesiones graves.
Desenergice totalmente antes de instalar o darle servicio.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
energizar el interruptor.
VL Motor Circuit Protector (MCP)
Trip Switch Setting (A)
450
540
630
720
810
900
750
900
1050
1200
1350
1500
1250
1500
1750
2000
2250
2500
600
720
840
960
1080
1200
1000
1200
1400
1600
1800
2000
1750
2100
2450
2800
3150
3500
Full Load Amps ( FLA ) not to exceed ampere rating of MCP.
Internet:
http://www.siemens.com/lowvoltage/technical-support
Tension dangereuse.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de
Couper l'alimentation de l'appareil et barrer avant de
travailler.
travailler.
Remplacez touts les couverts avant que
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
l'approvisionnement de pouvoir soit alimenté.
EX: HFP3M250.
FG
[3VL3525 - 2KL30 - 0AA0]
Catalog Number
HDP.L150.
[3VL2515 - 2KJ.. - 0AA0]
150 Amp
HDP.M150.
[3VL2515 - 2KK.. - 0AA0]
150 Amp
HDP.H150.
[3VL2515 - 2KL.. - 0AA0]
150 Amp
HFP.L250.
[3VL3525 - 2KJ.. - 0AA0]
250 Amp
HFP.M250.
[3VL3525 - 2KK.. - 0AA0]
250 Amp
HFP.H250.
[3VL3525 - 2KL.. - 0AA0]
250 Amp
Bestell-Nr./Order No.: 3ZW1012-0VL00-4AA0
© Siemens AG 2006
Advertisement
