THOMSON 28DT68L User Manual page 20

television set
connections
Your television set selects and automatically
displays in the menu the type of signal
(S-Video or Video) for the equipment connected.
UNITS CONNECTED
PAY-TV decoder
Satellite receiver
Video recorder VHS/S-VHS
Camcorder
PC / Games console
Name
You may give each piece of equipment connected a name.
Call up the AV 1, AV 2 or AV 3 menu.
Select the Signal line (yellow key).
Check the type of signal or select as necessary.
Select the Name line.
The first dash flashes.
You may enter the name of the channel using 6 characters.
Continue to press, the signs, figures and letters are displayed in
alphabetical order.
Continue to press : the letters are shown in reverse order.
When the required character appears, go to next character.
To leave a space look for the blank character (between ? and A)
or press briefly
CALLING UP AUDIOVISUAL PROGRAMMES
Press AV to call AV1, AV2 or AV3 programmes in sequence.
In most cases, the television set changes automatically to AV1 or
AV2, when the VCR connected is in play back mode.
When the VCR is stopped, the TV set returns to the station
previously watched.
The TV set changes automatically to 16/9 format if the unit
connected supplies the control voltage and if you have
selected AUTO from the FORMAT menu.
EURO EURO
AV 1 AV 2
VIDEO VIDEO
Automatic selection Automatic selection
VIDEO VIDEO
Automatic selection Automatic selection
VIDEO/S-VIDEO VIDEO/S-VIDEO
Automatic selection Automatic selection
Select RGB
Call AV 1
0/AV
Signal
Name
Signal
Name
AUDIO/VIDEO/
S-VIDEO AV 3 SOCKETS
VIDEO/S-VIDEO
Call AV 3
0/AV
AV 1
P.
P.
Signal
Name
Signal
P.
Name
Signal
Name
a z
1
z a
2
0/AV
0/AV
20
Video RGB
S-Video RGB
AV 2 AV 3
Video RGB
S-Video RGB
Video RGB
-