Disassembly And Assembly Instructions; Grip - Panasonic EY7881 Service Manual

Hide thumbs Also See for EY7881:

4 Disassembly and Assembly Instructions

* To reduce the risk of injury, always remove battery pack before removing/attaching the tool.

* To assemble the tool, start with 4.6. and proceed to 4.1.

4.1.

How to remove the Chuck handle.

4.2.

How to remove the Housing.

1. Loosen the support handle and take it out from the unit.

2. Pluck the chuck cover depressing the chuck handle.

Note:

If it is hardly to take out, use the slotted-head screwdriver.

3. Remove the chuck handle.

4. Take out a steel ball pushing the chuck spring with the chuck spring

plate.

5. Remove the chuck spring plate and chuck spring.

1. Remove 21pcs delta PT screws.

2. Remove 2pcs truss TP screwss.

3. Remove the H/D handle.

Note: (when assembling)

When reassembling, make sure that the elongated hole in the joint

installed in the bellows is positioned on the grip side.

Table of Contents