Table of Contents
Advertisement
06-EFC031-EN.qxd
4/07/05
Chapter 3
General operation
Switching the television set on or to standby
To switch the TV set on, press the B button located on the front of the set.
Standby mode
Press the B button on the remote control or on the appliance.The TV set remains powered up, but with low energy
consumption.
Quitting standby mode
- press the B or any numeric button on the remote control,
- press the
or
TV
OK
+ /
- buttons to display the follow channel or precedent the last channel loocking.
- press
PR
PR
- press the AV button to switch the television on at the last AV programme you were watching.
Volume
Volume control: use the
to increase or decrease the volume.
Sound mute: press the
Displaying status information
In TV mode, press the yellow button (
date, the time, the type of sound, and the type of format or zoom.If automatic shut-off has been programmed, the time left
is displayed.
In VGA mode, the picture resolution is displayed.
When you switch on the television or change channels, the number and name of the channel are displayed if you entered its
name under the ORGANISER menu.
Accessing channels
Using the numeric buttons:
- for channels 1 to 9, press the corresponding button.
- for channels 10 to 99,
- press the tens digit for a few seconds to display "x-" on the screen, then press the units digit, or
- press the 0 button to display "--", then enter the two digits.
+/
- buttons: scroll through the channels. Av programmes are not included in the cycle unless you use the
Using the
PR
PR
buttons on the front of the TV set.
Last programme
Press the
button to go straight to the last channel watched.
RETURN
Accessing AV programmes
Press the
button to display the last selected audio-visual programmes and scan through the other audio-visual programmes.
AV
AV selection loop: AV1, AV1-S, AV1 RGB , AV2 (depending on the model), AV2-S (depending on the model), AV3, AV3-S, CMP,
VGA.
Favourite channels
Press the red button to display the presets menu. Go to the Favourites line using the
Favourites. Now when you scroll through the channels with the PR+/PR- buttons you only go to those channels you have
marked as your favourites (see page 6).
Select All channels if you want to scroll through every saved channel.
Zoom
In TV mode, you have the option of changing the display format and using the zoom function via the
formats and zoom functions vary according to the screen format.
16/9 sets have the following formats and zoom functions available:
4/3 format - picture in 4x3 format
14/9 zoom - picture in 14/9 letterbox format
16/9 zoom - picture in 16/9 letterbox format
16/9 zoom up - picture in 16/9 letterbox format with subtitles
O O Cinerama - picture in widescreen 4x3 format
16/9 format - picture in 16/9 format
4/3 sets have two formats available: 4/3 format and 16/9 format .
When you change channels the format is not retained. However, if you used the zoom function, the setting will still apply.
18:45
Page 7
, buttons to switch the television on at the last channel you were watching,
+/
- buttons on the front of the TV set or press the relevant buttons on the remote control
VOL
VOL
button to temporarily mute the sound. Press this button again or the
) on the remote control handset to display the channel number and name, the
INFO
buttons and then choose
7
Operation
+ button to restore it.
VOL
buttons.The
EN
Advertisement
Table of Contents
