Making Individual Track Settings - Zoom F6 Control Operation Manual

Making individual track settings

Use the PFL screen to make settings for individual tracks.
1.
Tap on the HOME screen for the track to set.
This opens the PFL screen.
2.
Tap the setting to change on the PFL screen and change it.
■ Input Source
Set the input source of each track.
■ Phantom
Phantom power can be turned on/off and it is voltage set for each input separately.
■ Trim
This adjusts the input level.
■ Stereo Link
This sets the stereo linking of the input.
■ Stereo Link Mode
Signals from a mid-side format stereo mic input through stereo-linked tracks are converted
to an ordinary stereo signal.
■ HPF
The high pass filter can cut low frequencies to reduce the sound of wind, vocal pops and
other noise.
1
20
2