Basic Setup - Fellowes POWERSHRED 73Ci Manual

Hide thumbs Also See for POWERSHRED 73Ci:
Table of Contents

Advertisement

Available languages

Available languages

A.
B.
C.
D.
G.
CAPABILITIES
Will shred: Paper, credit cards, staples, small paper clips and CD/DVDs
Will not shred: Adhesive labels, continous form paper, transparencies, newspaper,
cardboard, large paper clips, laminates, file folders, X-rays or plastic other than noted
above
Paper shred size:
Cross-Cut ......................................................................................................4mm x 38mm
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
manual. Read the entire instruction manual before operating shredders.
set to off or unplug when not in use.
products on or near shredder. Do not use canned air on shredder.
Do not place near or over heat source or water.
BASIC SET UP
CASTER INSTALLATION
1
2
F.
G.
KEY
A. See safety instructions
B. Paper entry
C. SafeSense
D. Pullout bin
F. Disconnect power switch
2
3
1. Reverse (blue)
®
3. Forward (blue)
4. Bin full (red)
5. Bin open (red)
Maximum:
Sheets per pass ........................................................................................................... 12*
CDs/Cards per pass ....................................................................................................... 1*
Paper entry width .................................................................................................. 230mm
* A4 (70g), paper at 220-240V, 50/60 Hz, 2.0Amps; heavier paper, humidity or other than
rated voltage may reduce capacity. Recommended daily usage rates: 300 sheets, 25 credit
cards; 10 CD/DVDs;
12 sheets per pass.
Fellowes SafeSense
®
shredders are designed to be operated in home and office environments ranging
between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.
transformers, or extension cords should not be used with this product.
4
6. SafeSense
indicator (yellow)
®
7. Remove Paper (red)
5
ENGLISH
Model 73Ci

Advertisement

Table of Contents
loading

Table of Contents