Logitech M535 Manual page 3

1. Open Settings and click Bluetooth.
2. Tap on the Logitech device you want to connect to from the Other Devices list.
3. The Logitech device will be listed under My Devices when paired successfully.
Upon pairing, the LED light on the Logitech device stops blinking and glows steady for 5
seconds. The light then turns off to save energy.
Close
Bluetooth device doesn't work after computer wakes from sleep mode
To begin troubleshooting, please select your operating system:

Windows

Mac
Windows
1. In the Device Manager, change the Bluetooth wireless adapter power settings:
o Go to Control Panel > System and Security > System > Device Manager
2. In Device Manager, expand Bluetooth Radios, right-click on the Bluetooth wireless
adapter (ex. Dell Wireless 370 adapter), and then click Properties.
3. In the Properties window, click the Power Management tab and uncheck Allow the
computer to turn off this device to save power.
4. Click OK.
5. Restart your computer to apply the change.
Macintosh
1. Navigate to the Bluetooth preference pane in System Preferences:
o
Go to Apple Menu > System Preferences > Bluetooth
2. In the bottom-right corner of the Bluetooth preference window, click Advanced.
3. Make sure all three options are checked:
o Open Bluetooth Setup Assistant at startup if no keyboard is detected
o
Open Bluetooth Setup Assistant at startup if no mouse or trackpad is detected
o
Allow Bluetooth devices to wake this computer