About The Indicators; Link Indicator - Sony SRS-XB501G Help Manual

Hide thumbs Also See for SRS-XB501G:
Table of Contents

Advertisement

Help Guide
Wireless Speaker
SRS-XB501G

About the indicators

(power) indicator
Turns off
The speaker is turned off.
The speaker is turned on. The EXTRA BASS mode or LIVE SOUND mode is set. When you
Lights up (white)
purchase, the EXTRA BASS is set.
The speaker is turned on. The STANDARD mode is set. (The EXTRA BASS and LIVE SOUND
Lights up (green)
modes are not set.)
The speaker is shifting from the power-off state to the power-on state or vice versa.
Each time you press the –/+ (volume) buttons, the indicator flashes once.
Flashes (white or
When you operate the –/+ (volume) buttons and the volume is set at the lowest or highest level,
green)
the indicator flashes 3 times.
The speaker is being initialized.
Flashes (red)
The speaker has an error.
CHARGE indicator (orange)
Turns off
The speaker has completed charging.
Lights up
The speaker is being charged.
Flashes
The speaker has a charging error.
Flashes slowly
The built-in battery is running at less than 10% and needs to be charged.
Flashes 3 times
If the CHARGE indicator flashes 3 times and goes off when you turn on the speaker, the built-in
and turns off
battery is empty and needs to be charged.
Note
The speaker that is in use can be charged if it is connected to an AC outlet via the supplied AC adaptor or a USB AC adaptor
(commercially available). In this case, it may take longer to charge the built-in battery depending on the conditions of use.
Therefore, it is recommended to turn off the speaker when charging.
When you use the speaker at a loud volume for a long time, the built-in battery may run low even if the speaker is connected to
an AC outlet. As a result, sound becomes low. This is not a malfunction. Turn off the speaker and charge the built-in battery
sufficiently.
In an extremely cold or hot environment, charging stops for safety. If charging takes a long time, it also makes charging of the
speaker stop. To resolve these issues, disconnect the supplied AC adaptor or a USB AC adaptor (commercially available) from
the speaker and connect it within an operating temperature between 5 ℃ and 35 ℃ (41 °F and 95 °F). Then, charge the built-in
battery again.

LINK indicator

Turns off
No connection information is found.
44

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents