Cd; Playing A Cd; Programming A Cd - GPX HM3817DTBLK User Manual

cD

Playing a cD

If this is your first time playing a CD
on this unit, remove the cardboard
disc from behind the CD DOOR before
attempting to play an actual CD.
1 Press the oPeN/close button to
open the CD DOOR.
2 Insert a CD into the unit
3 Press the source button until the
unit is in CD mode.
The loaded CD will begin playing
automatically.
10 GPX | HM3817DTBLK

Programming a cD

1 Follow the steps for "Playing a CD",
then press the stoP button.
2 Press the moDe/Program/clock
aDj. button.
"PGM" and "P-01" will appear on the
LCD display, indicating that the unit is
in program mode, and it is ready for
the first track to be selected.
3 Press the skIP/tuNe buttons to
cycle through the tracks on the CD.
4 Press the moDe/Program/clock
aDj. button to select a track.
"P-01" will change to "P-02".
5 Repeat steps 3, 4, and 5 until the
desired CD tracks are programmed.
6 Press the Play/Pause button to
begin playing the programmed
tracks.
7 To review the programmed tracks,
stop the CD, press the moDe/
Program/clock aDj. button
repeatedly.