Replacing The Lamp - Sanyo PJLink PDG-DXL100 Owner's Manual

All manuals and user guides at all-guides.com
Appendices

Replacing the lamp

The projector will detect the lamp life itself. It will show you a
warning message
Warning: To avoid
projector to cool for
before you replace the
lamp!
Warning: To reduce the
do not drop the lamp
module or touch the
lamp bulb. The bulb
may shatter and cause
injury if it is dropped.
Warning: For contin-
ued safety replace with
a lamp of the same
type.
46
English
1
2
3
4
Lamp Replacing Procedure:
3. Disconnect the power cable.
5. Push up and remove the cover.
the lamp bar.
menu ->[Setting] ->[Lamp Counter Reset] to reset the lamp
usage hours. See page 29.
-
and pull up