Digital Tv - Set-Top (Dtv-Stb) Or Dvd Player Connection; Amplifier Connection (To Audio Amp) - Panasonic CT-27D11 Operating Instructions Manual

0373 -1E.fm Page 8 Monday, February 26, 2001 3:47 PM
I
NSTALLATION
Digital TV - Set-Top Box (DTV-STB) or DVD Player Connection
TERMINALS ON BACK OF DTV-STB OR DVD PLAYER
R-AUDIO-L

Amplifier Connection (To Audio Amp)

External Amplifier
8
Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) to the
back of your TV.
CABLES NOT SUPPLIED
Y P P
B R
R-AUDIO-L VIDEO S-VIDEO
NTSC OUTPUT
DIGITAL OUTPUT
Notes:
r
There are three video inputs, Y, P
luminance and color separation. Use the L (left) and R (right) audio inputs.
r
Select DTV-STB to 480i output mode. TV set can receive 480i signal only.
Connect to an external audio amplifier input for listening to a stereo system.
Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.
Audio Adjustments
1. Select TV SPEAKERS ON from AUDIO menu.
2. Set amplifier volume to minimum.
3. Adjust TV volume to desired level.
4. Adjust amplifier volume to match the TV.
5. Select TV SPEAKERS OFF&VAO from AUDIO menu.
6. Volume, mute, bass, treble and balance are now controlled from the TV.
Note: In OFF&FAO the volume is controlled by the external amplifier.
CABLES NOT SUPPLIED
COMPONENT VIDEO INPUT TERMINALS ON BACK OF TV
COMPONENT
VIDEO INPUT
TO AUDIO
AMP
INPUT 1
L
R
S-VIDEO
INPUT 2
, and P . Separate component color inputs provide
B R
CONNECTIONS ON BACK OF TV
COMPONENT
TO AUDIO
VIDEO INPUT
AMP
L
INPUT 1
R
S-VIDEO
INPUT 2
R AUDIO
L
P P Y/VIDEO
R B
R AUDIO VIDEO
L
R AUDIO
L
P P Y/VIDEO
R B
R AUDIO VIDEO
L