Tascam D01086320A Owner's Manual page 14

2 − Names and Functions of Parts
FOLDER ˙ / ¥ keys (CD and iPod)
78
Use these keys when the output source is set to CD
and a data CD is loaded to change the playback folder.
Select ALL to set the entire disc as the playback area.
(See "Folder playback (with data CDs only)" on page
24.)
When the output source is set to iPod, use these to select
(skip between) albums.
 key (CD and iPod)
Ô/
88
Press briefly to select tracks (skip). Press and hold to
search a track.
key (CD and iPod)
¯/
98
Press briefly to select tracks (skip). Press and hold to
search a track.
OPEN/CLOSE key (CD)
08
Use to open and close the disc tray.
PROGRAM EDIT key (CD)
q8
When the output source is set to CD, use this to make,
confirm and edit program settings. (See "Programmed
playback" on page 25.)
REPEAT key (CD and iPod)
w8
Press this key to cycle through the repeat playback
modes in the following order:
PITCH +/– keys (CD)
e8
Use these keys to set the pitch control value. (See "Pitch
control" on page 29.)
STOP key (CD and iPod)
r8
When the output source is set to CD, press this key to
stop playback.
When the output source is set to iPod, press this key to
pause playback.
PLAY/READY key (CD and iPod)
t
Press during playback to pause. When playback is
stopped or paused, press to start playback.
14
TASCAM CD-200i