ASROCK Z390 Phantom Manual page 27

ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.1, No. 2)
Chassis Intrusion Header
(2-pin CI1)
(see p.1, No. 14)
RGB LED Header
(4-pin RGB_LED1)
(see p.1, No. 7)
Addressable LED Header
(3-pin ADDR_LED1)
(see p.1, No. 5)
24
This motherboard pro-
vides a 8-pin ATX 12V
8 5
power connector. To use a
4-pin ATX power supply,
4 1
please plug it along Pin 1
and Pin 5.
This motherboard
1
supports CASE OPEN
GND
Signal
detection feature that
detects if the chassis cove
has been removed. This
feature requires a chassis
with chassis intrusion
detection design.
RGB header is used to connect
B
RGB LED extension cable which
R
G
allows users to choose from
12V
various LED lighting effects.
1
Caution: Never install the
RGB LED cable in the wrong
orientation; otherwise, the cable
may be damaged.
*Please refer to page 34 for
further instructions on this
header.
This header is used to connect
1
Addressable LED extension cable
GND
DO_ADDR
which allows users to choose
VOUT
from various LED lighting
effects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
*Please refer to page 35 for
further instructions on this
header.