Braun Oral-B Pro Trizone 6000 Manual page 8

Oral-B FlossAction brush head
features micropulse bristles that allow
for an outstanding plaque removal in
the interdental areas.
Oral-B 3D White brush head
features a special polishing cup to
naturally whiten your teeth. Please
note that children under 12 years old
should not use the Oral-B «3D White»
brush head.
Oral-B Sensitive brush head
features an extra soft bristle structure
that is gentle on teeth and gums.
Our dynamic TriZone brush head can be used
with all common brushing techniques.
Oral-B TriZone brush head
features triple zone cleaning action
for outstanding plaque removal, even
in between teeth.
Oral-B brush heads feature light blue INDICATOR
bristles to help you monitor brush head replace-
ment need. With thorough brushing, twice a day
for two minutes, the blue color will fade halfway
approximately within 3 months, indicating the need
to exchange your brush head. If the bristles splay
before the color recedes, you may exert too much
pressure on teeth and gums.
We do not recommend using the Oral-B «FlossAction»
or Oral-B «3D White» brush head with braces. You
may use the Oral-B «Ortho» brush head, specifically
designed to clean around braces and wires.
Synchronizing your
toothbrush
To avoid interference of display messages when
using more than one Oral-B toothbrush with radio
transmission and SmartGuide in the same house-
hold, you need to assign the handles to their
respective SmartGuide.
You can synchronize a maximum of 2 handles with
one SmartGuide. To do so, push the «h/min» button
in the battery compartment for at least 3 seconds.
The SmartGuide shows «L---». Turn on your handle
to start the synchronization process. It is finished
when «L-1-» is displayed. Turn off the handle. To
assign a second handle to the same SmartGuide
turn on the other handle until «L-2-» is displayed.
After having synchronized the second handle, «Full»
will be displayed. Exit the synchronization mode by
pressing the «h/min» or «set» button, otherwise it
will end automatically after 30 seconds.
Connecting your toothbrush
to your Smart Phone**
Download the Oral-B™ app for free from App
Store (SM) or Google Play™. The Oral-B™ app gives
you the opportunity to use your time more
efficiently, chart your brushing progress and
customize your toothbrush settings (for more
benefits see the Oral-B™ app instructions).
• Start the Oral-B™ app. You can use the app and
your SmartGuide (i) at the same time.
• The Oral-B™ app will guide you through the
Bluetooth pairing procedure.
Note: Oral-B™ app functionality is limited if
Bluetooth is deactivated on your phone (for
directions please refer to your smart phone's
user manual).
• Once you start using your toothbrush by lifting it
off the plugged-in charger (h) or pressing any
button (c)/(d), it automatically connects to the
Oral-B™ app. If no connection has been
established, briefly press the mode button (d) on
®
your toothbrush handle and wait for a connection.
• Any further app instructions will be displayed on
your smart phone.
• Keep your smart phone in close proximity when
using it with your toothbrush handle. Make sure
the smart phone is safely positioned in a dry
place.
Note: Your smart phone must support Bluetooth 4.0
(or higher) in order to connect to your toothbrush
handle.
** Check www.oralb.com for country
availability of the Oral-B App
Cleaning recommendations
After brushing, rinse your brush head under running
water with the handle switched on. Switch off
and remove the brush head. Clean handle and
brush head separately; wipe them dry before
reassembling. Disassemble the charging unit
before cleaning. Brush head compartment and
protective cover are dishwasher-safe. Both basic
charger and SmartGuide should be cleaned with a
damp cloth only. The removable inner part of the
9