Technical Data; Eu Declaration Of Conformity; Intended Use - Chicago Pneumatic CP8818 Operator's Manual

Technical data

Tool data
Free speed (rpm)
Square drive (mm)
Max. torque (reverse) (ft.lb)
Max. torque (reverse) (Nm)
Blows per minute
Battery voltage (V)
Weight (kg)
Weight (lb)
Ambient operating temperature
Ambient storage temperature
Recommended ambient charging tem-
perature
Recommended battery types
Recommended charger
Declarations

EU DECLARATION OF CONFORMITY

We, CHICAGO PNEUMATIC Tool Co. LLC, 1815 Club-
house Road, Rock Hill, SC 29730, declare under our sole re-
sponsibility that the product (with name, type and serial
number, see front page) is in conformity with the following
Directive(s):
Machinery (2006/42/EC), RoHs (2011/65/EU), EMC
(2014/30/EU)Machinery (2006/42/EC), RoHs (2011/65/
EU), EMC (2014/30/EU)
Harmonized standards applied:
EN 62841-1:2015; EN62841-2-2:2014, EN 55014-1:2017,
EN 55014-2:2017, EN50581-1:2012
Authorities can request relevant technical information from:
Pascal Roussy, R&D Manager, Ets Georges Renault, 38 rue
Bobby Sands, BP10273 44818 Saint Herblain, France
Saint-Herblain,
Pascal ROUSSY
Signature of issuer
Date : 01/05/2018
8
CP8818
2000
85
115
3000
20
1.09
2.4
-18°C to 50°C
0 to 40°C
10 to 38°C
CP20XP
CP20XP60
CP20CHE 20V EU
CP20CHU 20V US
CP20CHA 20V
AUS
CP20CHK 20V UK
CP20CHKC 20V
KC
© Chicago Pneumatic - 8940172293
Noise and Vibration Declaration Statement
• Sound pressure level dB(A) , uncertainty 3 dB(A), in ac-
cordance with EN 62841 .
• Sound power level 98 dB(A) , uncertainty 3 dB(A), in
accordance with EN 62841 .
• Vibration total value 4.8 m/s
dance with ISO-28927-2.
These declared values were obtained by laboratory type test-
ing in accordance with the stated standards and are suitable
for comparison with the declared values of other tools tested
in accordance with the same standards. These declared val-
ues are not adequate for use in risk assessments and values
measured in individual work places may be higher. The ac-
tual exposure values and risk of harm experienced by an indi-
vidual user are unique and depend upon the way the user
works, the workpiece and the workstation design, as well
upon the exposure time and the physical condition of the
user.
We, CHICAGO PNEUMATIC Tool Co. LLC, cannot be
held liable for the consequences of using the declared values,
instead of values reflecting the actual exposure, in an individ-
ual risk assessment in a work place situation over which we
have no control.
This tool may cause hand-arm vibration syndrome if its use
is not adequately managed. An EU guide to managing hand-
arm vibration can be found by accessing
www.pneurop.eu/index.php
lation'.
We recommend a programme of health surveillance to detect
early symptoms which may relate to noise or vibration expo-
sure, so that management procedures can be modified to help
prevent future impairment.
If this equipment is intended for fixtured applications:
The noise emission is given as a guide to the machine-
builder. Noise and vibration emission data for the com-
plete machine should be given in the instruction manual
for the machine.
Statement of use
This product is designed for installing and removing threaded
fasteners in wood, metal or plastic.
No other use permitted. For professional use only.

Intended use

This Impact Wrench is intended to be used only by adults
who have read and understood the instructions and warnings
in this manual and can be considered responsible for their ac-
tions.
• This product is designed for installing and removing
threaded fasteners in wood, metal or plastic.
• Do not use the Impact Wrench for any other purpose not
described above.
Cordless impact wrench
2
, uncertainty 1.5, in accor-
http://
and selecting 'Tools' then 'Legis-