Appendix C: Mix Series Specifications - Tapco Mix.120 Owner's Manual

APPENDIX C: MIX SERIES SPECIFICATIONS

Frequency Response
Mic Input to any Output (Trim at 0 dB):
Distortion
THD and SMPTE IMD; 20Hz to 20kHz
Mic Input to Main Output:
Noise
20 Hz to 20 kHz BW (150
Equivalent Input Noise (EIN):
Residual Output Noise:
Channel and Main Mix levels off
Main, Ctrl Room, Phones:
Common Mode Rejection Ratio (CMRR)
Mic In:
Crosstalk
Adjacent Inputs or Input to Output:
Input Gain Control Range
Phantom Power
Equalization
Mono Channel EQ (Mix.50 only):
High
Low
Mono Channel EQ (Mix.60, Mix.100, Mix.120)
Stereo Channel EQ (Mix.60):
High
Mid
Low
+0, –1 dB,
10 Hz to 150 kHz
–3 dB,
10 Hz to 200 kHz
< 0.005%
@ +4 dBu output
source impedance)
Ω
–129 dBu
–106 dBu
60 dB @ 1 kHz
Gain @ maximum
–90 dB @ 1 kHz
0 dB to +50 dB
+48 VDC
±15 dB @ 12 kHz
±15 dB @ 80 Hz
±15 dB @ 12 kHz
±15 dB @ 2.5 kHz
±15 dB @ 80 Hz
Mixer Rated Output
Main, Aux, Control Room:
Maximum Rated Output:
Maximum Input Levels
Mic Input:
Line Input:
Tape Input and Aux Return:
Input Impedance
Mic Input:
Line Input:
Stereo Aux Returns:
CD/Tape In:
Output Impedance
Main
Ctrl Room, Aux Sends:
Tape Output:
Phones Output:
VU Meters
Main Left and Right
4 segments:
Clip (+18), +6, 0, –20
0 LED = 0 dBu
AC Power Requirements
External Power Supply output:
18.5 VAC x 2 @ 150 mA
(3-pin AC power connection)
External Power Supply AC input
U.S.
Europe
Japan
Korea
+4 dBu
+22 dBu
+12 dBu,
Gain @ +10 dB
+30 dBu,
Gain @ +10 dB
+22 dBu
2.6 k , balanced
Ω
20 k , balanced
Ω
20 k , balanced
Ω
24 k , unbalanced
Ω
240 , balanced
Ω
120 , unbalanced
Ω
120
Ω
1 k
Ω
25
Ω
120 VAC, 60 Hz
240 VAC, 50 Hz
100 VAC, 50/60 Hz
220 VAC, 60 Hz
17